Sample Pump (Sensidyne A) for Models 400 and 410 Nitric Oxide Monitors

SKU: NOPUMPSAMPLE

Ozone Pump (Sensidyne A) for Model 400 Nitric Oxide Monitor

SKU: NOPUMPOZONE

Note that this pump is for the Model 400 NO Monitor. The Model 410 does not require an Ozone Pump.

Total Flow Pump (Sensidyne A) for Models 400 and 410 Nitric Oxide Monitors

SKU: NOPUMPTOTAL

Total Flow Meter Assembly for Model 400 and 410 Nitric Oxide Monitors

SKU: FLOWMETER(TOTALFLOW)410

Ozone Flow Meter Assembly for Models 400 and 410 Nitric Oxide Monitors

SKU: FLOWMETER(OZONEFLOW)410

Sample Flow Meter Assembly for Model 400 and 410 Nitric Oxide Monitors

SKU: FLOWMETER(SAMPLEFLOW)410

Needle Valve for Flow Control

SKU: NDLVLV

Lamp Assembly for Models 400 and 410 Nitric Oxide Monitor

SKU: NOLAMPAS

Quartz Absorption Cell for Model 400 and 410 Nitric Oxide Monitors

SKU: NOCELL

Photodiode Assembly for Models 400 and 410 Nitric Oxide Monitors

SKU: PDASSEMBLY410

LCD Assembly for Models 400 and 410 Nitric Oxide Monitors

SKU: NODSP

NO Valve for Models 400 and 410 Nitric Oxide Monitor, Nickel-Plated Brass

SKU: NOVLVNO

Ozone Valve for Models 400 and 410 Nitric Oxide Monitors, Stainless Steel

SKU: NOVLVOZ

Ozone Source for Models 400 and 410 Nitric Oxide Monitors

SKU: OZSOURCE

Reaction Coil for Models 400 and 410 Nitric Oxide Monitors

SKU: REACTIONCOIL

Adapter Box for Model 410/Model 401 Combination

SKU: 410ADAPTERBOX

To be used when connecting the Model 410 directly to a computer with the 9PinF-9PinF serial cable without going through a Model 401 NO2 Converter.

Select Switch for Model 400 and 410 NO Monitors

SKU: SELECTSWITCH410

Power Pack for Models 211, 306, 400, 408, 410 and Ozone Monitors with External Pump, 100-240 VAC Input, 2.5 Amp Output at 12 V

SKU: PWRPK-2.5 A

In the shopping cart, you will be asked to specify the country for the AC plug.

Internal Power Jack and Cable for Models 202, 205, 306, 400, 410

SKU: PWRASSY

Serial Connector (Internal)

SKU: SERCON

Mounts to instrument case.

Serial Cable for Connection Between Model 400 or Model 410 NO Monitor and Model 401 NO2 Converter

SKU: SERCABL410/401

9 pin, Male-to-Male Serial Cable for passing power and data between the Model 400 or 410 NO Monitor and the Model 401 NO2 Converter

Serial-to-USB Adapter for Model 400 and 410 Nitric Oxide Monitors

SKU: SERUSB410

Serial Cable for Connecting Instrument to Computer

SKU: SERCABL

This straight-through,female-female, 9-pin serial cable is required for RS232 communication with all 2B Tech instruments. Note: Serial cables purchased through electronics stores are usually "cross over" (pins 1 and 3 cross over) and not "straight through" and won't work with 2B Tech instruments.

Particle Filter Housing for 47-mm Filters

SKU: FILTERHS(47mm)

Package of Ten 47-mm Diameter, 5-6 Micron Pore Size Teflon Particle Filters

SKU: FILTERPK(47mm)

DEW-Line Consisting of Two Nafion Tubes in Parallel for Humidity Equilibration in Models 106-L, 106-M, 202, 205 and 400

SKU: DEW

Two Dew-Lines are required for the Model 205 Dual Beam Ozone Monitor because of the two flow paths.

Internal Ozone Scrubber for Model 410 NO Monitor

Internal NO Scrubber for Model 410 Nitric Oxide Monitor

External NOx Scrubber for Models 400 and 410

This scrubber removes both NO and NO2 from sampled air. It is attached to the inlets of the Models 400 and 410 Monitors to determine the zero offset.

Cleaning Loop set for Models 202, 205, 400 and 410

SKU: CLEANLOOP

Model 410 Field Kit: Spare parts kit including: 1 Total Flow Pump, 1 Sample Pump, 1 Ozone Valve, 1 NO Valve, 1 External NOx Scrubber, 1 Lamp Assembly; 2 Internal NO Scrubbers, 2 DewLine Assemblies

SKU: FIELDKIT410